HP FlexNetwork 10500 Series Configuration Manual page 282

Creating a VPN instance
A VPN instance is a collection of the VPN membership and routing rules of its associated site. A VPN
instance might correspond to more than one VPN.
To create and configure a VPN instance:
Step
1. Enter system view.
2. Create a VPN instance and
enter VPN instance view.
3. Configure an RD for the VPN
instance.
4. (Optional.) Configure a
description for the VPN
instance.
5. (Optional.) Set an ID for the
VPN instance.
6. (Optional.) Configure an
SNMP context for the VPN
instance.
Associating a VPN instance with an interface
After creating and configuring a VPN instance, associate the VPN instance with the interface
connected to the CE.
To associate a VPN instance with an interface:
Step
1. Enter system view.
2. Enter interface view.
3. Associate a VPN instance
with the interface.
Configuring route related attributes for a VPN instance
Step
1. Enter system view.
Command
system-view
ip vpn-instance
vpn-instance-name
route-distinguisher
route-distinguisher
description text
vpn-id vpn-id
snmp context-name
context-name
Command
system-view
interface interface-type
interface-number
ip binding vpn-instance
vpn-instance-name
Command
system-view
273
Remarks
N/A
By default, no VPN instances
exist.
By default, no RD is configured for
a VPN instance.
By default, no description is
configured for a VPN instance.
The description should contain
the VPN instance's related
information, such as its
relationship with a certain VPN.
By default, no ID is configured for
a VPN instance.
By default, no SNMP context is
configured.
Remarks
N/A
N/A
By default, an interface is not
associated with a VPN instance
and belongs to the public network.
The ip binding vpn-instance
command clears the IP address of
the interface. Therefore,
reconfigure an IP address for the
interface after configuring this
command.
Remarks
N/A