HP FlexNetwork 10500 Series Configuration Manual page 411

[PE3-vsi-aaa-auto] quit
[PE3-vsi-aaa] quit
# Create Ethernet service instance 10 on GigabitEthernet 1/0/1 to match packets with an outer
VLAN ID of 100, and bind the Ethernet service instance to VSI aaa.
[PE3] interface gigabitethernet 1/0/1
[PE3-GigabitEthernet1/0/1] service-instance 10
[PE3-GigabitEthernet1/0/1-srv10] encapsulation s-vid 100
[PE3-GigabitEthernet1/0/1-srv10] xconnect vsi aaa
Verifying the configuration
# Verify that two PWs have been established on PE 1.
[PE1] display l2vpn pw verbose
VSI Name: aaa
Peer: 2.2.2.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
Peer: 3.3.3.9
Signaling Protocol
Link ID
In Label
MTU
PW Attributes
VCCV CC
VCCV BFD
Tunnel Group ID
Tunnel NHLFE IDs
# Display LDP PW label information on PE 1.
[PE1] display l2vpn ldp verbose
Peer: 2.2.2.9
VSI Name: aaa
PW State: Up
PW Status Communication: Notification method
PW ID FEC (Local/Remote):
Local AII
Remote AII
PW Type
Group ID
Label
Control Word: Disabled/Disabled
VCCV CV Type: -/-
VCCV CC Type: -/-
MTU
VPLS ID: 100:100
: LDP
: 8
: 1555
: 1500
: Main
: -
: -
: 0x800000060000000
: 1029
VPLS ID: 100:100
: LDP
: 9
: 1554
: 1500
: Main
: -
: -
: 0x800000160000001
: 1030
VPLS ID: 100:100
: (1.1.1.9, 2.2.2.9)
: (2.2.2.9, 1.1.1.9)
: VLAN/VLAN
: 0/0
: 1555/1555
: 1500/1500
PW State : Up
Out Label: 1555
PW State : Up
Out Label: 1416
402