Calling The Telegram Configuration - Siemens SINUMERIK 840D sl Configuration Manual

5.6.2

Calling the telegram configuration

The telegram configuration is part of the device properties (SINAMICS Integrated or NX).
Procedure
Proceed as follows to display an overview of all configured telegrams:
1. Select the device in the device view:
– To display the telegram configuration of the SINAMICS Integrated of an NCU, select
– To display the telegram configuration of an NX, select the NX.
2. In the inspector window, click "Telegram configuration" under "Properties > General".
Result
An overview of all of the telegrams configured on the device is displayed.
● Structure of the "Telegram configuration" dialog (Page 112)
When you click on one of the lower-level elements (e.g. "Send (actual value)"), you switch to
the complete properties of the drive object or telegram.
● Changing the properties of receive telegrams (setpoint) (Page 116)
● Changing the properties of send telegrams (actual value) (Page 113)
See also
Adapting the number of drives (Page 119)
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325
SINAMICS Integrated.
Configuring telegrams and drive units
5.6 Displaying or adapting the telegram configuration
111