Importing Sinumerik Plc Alarm Texts - Siemens SINUMERIK 840D sl Configuration Manual

Importing user alarms

8.5 Importing SINUMERIK PLC alarm texts

8.5 Importing SINUMERIK PLC alarm texts
Requirement
● A SINUMERIK NCU or device proxy (PLC 300) is inserted.
● The TS files of the corresponding language are available on the configuration computer.
See Exporting TS files from SINUMERIK Operate (Page 154)
● The languages in which the TS files are available are activated as project languages
(Page 157) in the TIA Portal.
If you would like to assign a TS file that is to be imported to several language variants,
enable all of the desired language variants.
Note
Please ensure that the number of alarm numbers is the same in all languages to be
imported. If required, you can enter an alarm number without text in the alarm text list.
Procedure
To import SINUMERIK user alarm texts into the TIA Portal, proceed as follows:
1. In the Project tree, right-click the PLC or the device proxy, then select "Import
SINUMERIK PLC alarm texts" in the shortcut menu.
The "Import SINUMERIK PLC alarm texts" dialog opens.
2. Enter the path in which you have saved the user alarm files.
158
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325