Software Options For Safety Integrated Plus (F-Plc) - Siemens SINUMERIK 840D sl Configuration Manual

Safety configuration
9.6 Licensing
9.6.3

Software options for Safety Integrated plus (F-PLC)

For the use of Safety Integrated plus (F-PLC), you require in addition to the license for
SIMATIC STEP 7 Safety Advanced (TIA Portal), the appropriate software options for the RT
function:
Table 9- 3
Software option
SINUMERIK Safe-
ty Integrated plus
/SI logic
SINUMERIK Safe-
ty Integrated plus
/SI axis/spindle
SINUMERIK Safe-
ty Integrated plus
/SI multi-axis
package
Depending on the functions used, you must license the appropriate software options and set
in the machine data:
● MD19500 $MN_SAFE_PLC_LOGIC: Safety Integrated plus /SI-Logic basic option
● MD19121 $MN_NUM_DRIVEBASED_SAFE_AXES: Number of axes/spindles in Safety
Integrated plus (F-PLC) mode
See also:
SINUMERIK 840D sl Basic Software and Operating Software Commissioning Manual,
Section SINUMERIK Operate (IM9)
Function Manual, SINUMERIK Safety Integrated plus
176
Software options for the use of Safety Integrated plus (F-PLC)
Purpose
Activate the F-PLC in SINUMERIK 840D sl in order to process the fail-safe sen-
sors and actuators in an F-program.
Use the motion control functions of the SINAMICS Integrated in the SINUMERIK
Safety Integrated plus (F-PLC) mode.
License for one axis/spindle, multiple licensing in order to be able to use further
axes/spindles.
Use the motion control functions of the SINAMICS Integrated in the SINUMERIK
Safety Integrated plus (F-PLC) mode.
License for any number of axes/spindles.
SINUMERIK STEP 7 Toolbox V14 SP1
Configuration Manual, 05/2017, A5E41846325