Panasonic VariCam LT Operating Manual page 106

Chapter 6 Audio recording — Selecting audio input and adjusting recording levels
2
Adjust the audio level by turning the <IRIS/SEL> dial button or the <IRIS> dial on the grip module.
3
Switches the channel to operate the volume by pressing the USER button (<USER 1>, <USER 2>, <USER 3>, <USER GRIP1>,
<USER GRIP2>) that [AUDIO MONITOR CH] is assigned as necessary.
4
Adjust the audio level of the switched channel by turning the <IRIS/SEL> dial button or the <IRIS> dial on the grip module.
5
Press the USER button (<USER 1>, <USER 2>, <USER 3>, <USER GRIP1>, <USER GRIP2>) button that [DIRECT VOL CTRL] is
assigned.
The direct volume control function will end.
The icon indicating the audio channel ([CH1/2] or [CH3/4]) in the status display of the output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI> terminal
will change to continuous illumination. Or the audio level meter in the status display of the output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI>
terminal will disappear.
The <IRIS/SEL> dial button and the <IRIS> dial on the grip module will return to it original iris control operation.
@ NOTE
t Display of the audio when the direct volume control is disabled will differ depending on the settings of [MENU] → [OUTPUT SETTINGS] → [VF SDI
INDICATOR] → [AUDIO LEVEL METER] and the [MENU] → [OUTPUT SETTINGS] → [SDI OUT INDICATOR] → [AUDIO LEVEL METER].
t It will be menu or contents selection move operation instead of the direct volume control when operating the MENU screen or the PLAY screen.
t Operation is not possible when a camera image is not displayed in the output from the <SDI OUT 1>/<SDI OUT 2>/<VF SDI> terminal.
t [AUDIO LEVEL METER] for the status display is not displayed when [MENU] → [OUTPUT SETTINGS] → [VF SDI OUT] → [VF SDI CLEAN VIEW] is
set to [ON] while [AUDIO] is displayed in the status display of the output from the <VF SDI> terminal.
t [AUDIO LEVEL METER] for the status display is not displayed when [MENU] → [OUTPUT SETTINGS] → [SDI OUT] → [SDI OUT 1 CLEAN VIEW] is
set to [ON] while [AUDIO] is displayed in the status display of the output from the <SDI OUT1> terminal.
t [AUDIO LEVEL METER] for the status display is not displayed when [MENU] → [OUTPUT SETTINGS] → [SDI OUT] → [SDI OUT 2 CLEAN VIEW] is
set to [ON] while [AUDIO] is displayed in the status display of the output from the <SDI OUT2> terminal.
t The display of the audio level meter during the normal speed playback (excluding playback pause/fast-forward playback/fast-reverse playback)
differs depending on the settings of [MENU] → [OUTPUT SETTINGS] → [VF SDI INDICATOR] → [AUDIO LEVEL METER] and [MENU] → [OUTPUT
SETTINGS] → [SDI OUT INDICATOR] → [AUDIO LEVEL METER].
– 106 –