[Peripheral] - Panasonic VariCam LT Operating Manual

[PERIPHERAL]

Applies settings related to functions used in conjunction with peripheral devices, such as network and GPS devices.
Item
[GPS]
[NETWORK SEL]
[NETWORK FUNC] [USER ACCOUNT]
[ACCOUNT LIST]
[FTP CLIENT SERVICE] [TCP CTRL PORT1]
[TCP CTRL PORT2]
[UDP CTRL PORT1]
[UDP CTRL PORT2]
[SERVER URL]
[LOGIN USER]
[LOGIN PASSWORD]
[SSH]
[SSH PORT]
[LAN PROPERTY] [MAC ADDRESS]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[DHCP SERVER]
[WIRELESS [MAC ADDRESS]
PROPERTY]
[TYPE]
Chapter 10 Menu Operations — Menu list
Configures internal GPS settings.
[ON]: Activates the GPS operation. Outputs the location information as a signal to the <SDI OUT> terminal
and records it as clip metadata.
[OFF]: Does not activate the GPS operation. Does not output and record the location information.
f Factory setting: [OFF]
Sets the connection method when connecting the camera with an external device (such as a computer) via
network.
[LAN]: Connects via the <LAN> terminal.
[WLAN]: Connects via wireless LAN.
[4G/LTE]: Connects via 4G/LTE.
[OFF]: Does not connect.
f Factory setting: [OFF]
Sets the user account to be used for authentication in the network function of the camera.
Displays the currently set account name. Also registers new accounts and deletes accounts.
Sets the TCP control port 1. Normally, do not change. If it is changed, it will be enabled after a restart.
Select different values for [TCP CTRL PORT1], [TCP CTRL PORT2], [UDP CTRL PORT1], and [UDP
CTRL PORT2].
f Factory setting: [49152]
Sets the TCP control port 2. Normally, do not change. If it is changed, it will be enabled after a restart.
Select different values for [TCP CTRL PORT1], [TCP CTRL PORT2], [UDP CTRL PORT1], and [UDP
CTRL PORT2].
f Factory setting: [59152]
Sets the UDP control port 1. Normally, do not change. If it is changed, it will be enabled after a restart.
Select different values for [TCP CTRL PORT1], [TCP CTRL PORT2], [UDP CTRL PORT1], and [UDP
CTRL PORT2].
f Factory setting: [49153]
Sets the UDP control port 2. Normally, do not change. If it is changed, it will be enabled after a restart.
Select different values for [TCP CTRL PORT1], [TCP CTRL PORT2], [UDP CTRL PORT1], and [UDP
CTRL PORT2].
f Factory setting: [49154]
Sets the proxy file transfer destination server name and folder for the FTP client function.
Transfers to the login folder of the server if only server name or address is entered.
Transfers to the specified folder of the server if entered in server name or address/folder format.
Sets the user ID to connect to.
Sets the password to connect to.
The menu setting value is displayed with [*].
Sets when transferring files using SSH.
[ENABLE]: Uses SSH.
[DISABLE]: Does not use SSH.
f Factory setting: [DISABLE]
Sets the network port number when SSH is used.
Sets to the same number as the server. The menu setting value is displayed with [*].
f Factory setting: [22]
Displays the MAC address of the <LAN> terminal on the camera. (Cannot be changed.)
Sets whether to use automatic acquisition via DHCP. (Mutually exclusive with [DHCP SERVER] setting)
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f Factory setting: [ENABLE]
Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
Sets the default gateway when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
Sets the primary DNS server when [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
Sets the secondary DNS server when [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
Sets whether to use the DHCP SERVER function when connected via wired LAN. (Mutually exclusive with
[DHCP] setting)
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [DISABLE]
Displays the MAC address of the wireless LAN of the camera. (Cannot be changed.)
Sets the connection method.
[DIRECT]: Accesses to the network function of the camera directly from a smartphone, tablet, or computer.
[INFRA]: Connects to the wireless access point.
f Factory setting: [DIRECT]
– 161 –
Description of settings