Panasonic VariCam LT Operating Manual page 162

Item
[SSID INPUT MODE]
[SSID]
[BAND]
[CHANNEL(2.4GHz)]
[CHANNEL(5GHz)]
[ENCRYPTION]
[ENCRYPT KEY]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[DHCP SERVER]
[4G/LTE PROPERTY] [APN]
[USER ID]
[PASSWORD]
[DIAL NO.]
[NETWORK TOOLS] [LOG DISPLAY]
[STATUS DISPLAY]
[INITIALIZE]
[PING]
Chapter 10 Menu Operations — Menu list
Sets the setting method of SSID.
When [TYPE] in [WIRELESS PROPERTY] is set to [INFRA], this item can be set.
[SELECT]: Selects from the access point list.
[MANUAL]: For entering the access point manually.
f Factory setting: [SELECT]
Displays network name (SSID).
Factory setting: [AU-V35LT1]
Switches between two transmission methods (2.4 GHz or 5 GHz).
[2.4GHz], [5GHz]
f Factory setting: [2.4GHz]
Sets the channels to be used when [DIRECT] is selected in [TYPE], [2.4GHz] is selected in [BAND], and
the camera is connected via wireless LAN.
[AUTO], [CH1], [CH6], [CH11]
f Factory setting: [AUTO]
Sets the channels to be used when [DIRECT] is selected in [TYPE], [5GHz] is selected in [BAND], and the
camera is connected via wireless LAN.
The selection differs depending on the installed wireless module.
[AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132],
[CH136], [CH140], [CH149], [CH153], [CH157], [CH161], [CH165]
f Factory setting: [AUTO]
Sets the encryption format.
[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
f Factory setting: [WPA2-AES]
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64
digits.
f Factory setting: [01234567890123456789abcdef]
Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f Factory setting: [ENABLE]
Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or
when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f Factory setting: [0.0.0.0]
Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP],
or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f Factory setting: [0.0.0.0]
Sets if the DHCP SERVER function is to be used or not when [DIRECT] is selected in [TYPE].
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [ENABLE]
Sets the APN (Access Point Name) provided by the provider.
Sets the user name provided by the provider.
Sets the password provided by the provider.
Sets the phone number. For details, refer to the manual of the provider you have contracted.
Displays the connection log.
Displays the network status.
Restores the network setting status to the factory settings.
Checks the connection of the network using the PING command against the server specified in [MENU] →
[PERIPHERAL] → [FTP CLIENT SERVICE] → [SERVER URL].
– 162 –
Description of settings