Panasonic VariCam LT Operating Manual page 203

Viewfinder status display
[REC IMPOSSIBLE]
[REC WARNING]
[REC WARNING]
[REC WARNING]
[RUN DOWN CARD]
[TEMPORARY PAUSE]
[CINE STYLE DISABLED!]
[SUB SLOT REC DISABLED!]
[CHECK BROKEN CLIP]
When noticing with dedicated display or lamp
Attaching the electronic HD color view finder AU-VCVF10G (optional) will indicate warnings for battery and media with the lamp on the viewfinder.
Viewfinder status display
Battery lamp and warning lamp flashes
[EMP] is displayed on either or both
remaining battery level information.
Battey lamp and warning lamp flashes once
per second.
Either or both remaining battery level
information will flash.
Warning lamp flashes
[END] is displayed on either or both
remaining media space information.
Warning lamp will flash once per second
during recording.
Either or both remaining media space
information will flash.
During thumbnail and menu operation
Display
[CANNOT ACCESS!]
[CANNOT DELETE!]
[CANNOT FORMAT!]
Chapter 12 Maintenance — Warning system
Description
A card that cannot record is inserted in the main slot or
sub slot.
Displayed when attempting to record in excess of the
maximum total number of clips allowed for one P2 card.
f Warning lamp flashes four times per second during
continuous recording.
Alarm will sound four times in one second.
Displayed when an error occurs in recorded data during
recording.
f Warning lamp flashes four times per second during
continuous recording.
Alarm will sound four times in one second.
Displayed when the recording is cancelled due to
error in the reference signal in case such as error has
occurred in the video or audio due to disruption of the
reference signal during the interval recording.
f The warning lamp will flash four times in one second.
Alarm will sound four times in one second.
The maximum number of overwrites has been
exceeded.
Recording is temporary suspended due to correct
recording not possible because of the disruption of input
signal from the <GENLOCK IN> terminal. The clip will
be divided.
f Warning lamp flashes four times per second during
continuous recording.
Alarm will sound four times in one second.
CAM INDEX/REEL number cannot be recorded as a
file name.
Recording is not possible because there is no media in
the sub slot.
The P2 card contains a damaged clip.
Description
Battery is consumed.
Battery is almost consumed.
There is no more space on the recording media in the
main slot or the sub slot.
The remaining space on the recording media in the
main slot or the sub slot is low.
Description
Data cannot be accessed due to a content defect or
some other reason.
The content versions do not match. Cannot delete.
A P2 card problem or some other reason prevents
formatting.
– 203 –
Behavior and cause
f The current operation will continue.
f Insert a card that can be recorded.
expressP2 memory card for the main slot, and
Class10 or higher SDXC memory card for the sub slot
is recommended.
f The operation will stop.
f [REC WARNING!] [OVER MAX# CLIPS] will be
displayed on the warning display when opening the
[DIAGNOSTICS] screen from the INFO screen.
f Replace the P2 card or delete unnecessary clips.
f The operation will continue or stop.
f [REC WARNING!][REC DATA] will be displayed on the
warning display when opening the [DIAGNOSTICS]
screen from the INFO screen.
f Turn off the power and on before using it again.
f Recording will be stopped.
f [REC WARNING!] [FRAME SIGNAL] is displayed in
the warning display field when the [DIAGNOSTICS]
screen is opened from the INFO screen.
f Confirm if the signal input to the <GENLOCK IN>
terminal is not disrupted.
f The current operation will continue.
f Replacement of the P2 card is recommended.
f The operation will pause.
f Recording will resume when the signal returns to
normal.
f Use the expressP2 memory card or Class10 or higher
SDXC memory card.
f Insert a medium in the sub slot or change the
recording destination of the proxy file to the main slot
only.
f The current operation will continue.
f Restore or delete the damaged clip in the PLAY
screen.
Behavior and cause
f Recording and playback operation will be stopped.
f Alarm will continue to be output.
f Replace the battery.
When remaing battery connected to the <DC IN>
terminal has run out, attach a battery with sufficient
level to the battery holder.
It will automatically switch to the battery holder and
warning will stop. It will be same for the opposite case.
f Recording and playback will continue.
f Refer to the instructions when battery is consumed.
f Recording will be stopped.
f Alarm will continue to be output.
f Delete clips in the recording media or insert a new
recording media.
f Recording will continue.
f Replace the media if required.
Behavior and cause
Ensure the health of the media and the clips.
Match the device and contents version.
Check the P2 card.