Panasonic VariCam LT Operating Manual page 113

Expanded display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [EXPAND1 SW]/[EXPAND2 SW] to [ON].
f The display mode can be set in [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [EXPAND MODE]/[- POS1]/[- VALUE1]/[- POS2]/
[- VALUE2].
NOTE
@
t The output video from the <VF SDI> terminal is enlarged.
t The output from the <SDI OUT 1> terminal is not enlarged.
t The output from the <SDI OUT 2> terminal will be the same display as the output from the <VF SDI> terminal when [VF SDI] is selected in [MENU] →
[OUTPUT SETTINGS] → [SDI OUT] → [SDI OUT 2 SIGNAL SEL].
Focus in color
Peaking display (focus in red)
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FOCUS IN COLOR SW] to [ON].
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- COLOR SEL] to [RED].
Adjust the focus so that the contours of the subject you want to focus on turn red.
[GREEN] or [WHITE] can also be selected in [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- COLOR SEL].
The region that is colored is changed by [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- PEAKING VALUE].
The video in background can be changed to monochrome by [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [- MONO].
@ NOTE
t This is displayed only on the output video from the <VF SDI> terminal.
Focus square display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [FOCUS SQUARES SW] to [ON].
Adjust the focus so that the square size displayed in the area of the subject to be focused becomes the largest.
When focused on the doll
@ NOTE
t This is displayed only on the output video from the <VF SDI> terminal.
Monochrome display
Set [MENU] → [OUTPUT SETTINGS] → [VF SDI FOCUS ASSIST] → [MONO SW] to [ON].
@ NOTE
t This is displayed only on the output video from the <VF SDI> terminal.
Open iris focus assist function
This is a function to make focusing easier by decreasing the depth of field by opening the iris. At the same time, the brightness is kept constant by
operating the shutter.
The diaphragm is operated automatically when the EF lens is used.
The diaphragm is required to be operated manually when the PL lens is used.
Set [MENU] → [OUTPUT SETTINGS] → [OPEN IRIS FOCUS ASSIST] → [OPEN IRIS FOCUS SW] to [ON].
The function is automatically cancelled when the time set in [MENU] → [OUTPUT SETTINGS] → [OPEN IRIS FOCUS ASSIST] → [VALUE] has
elapsed.
The time that can be set is 10 seconds or 30 seconds.
The function is forced to cancel when the recording is started.
Chapter 7 Viewfinder — Convenient shooting functions
– 113 –
When focused on the panel