Panasonic VariCam LT Operating Manual page 141

Item
[FAN] [FAN SPEED]
[GENLOCK] [GENLOCK MODE]
[H PHASE COARSE]
[H PHASE FINE]
[CONTROL DISPLAY] [BRIGHTNESS]
[COLOR LEVEL]
[CONTRAST]
[BACK LIGHT]
[BUTTON LED]
[CLOCK] [CLOCK SETTING]
[TIME ZONE]
[DATE FORMAT]
[INFORMATION] [OPERATION TIME]
[VERSION]
[UPDATE]
[USB]
[TRACE LOG]
[SENSOR TEMP]
[LANGUAGE]
[INITIALIZE] [LOAD FACTORY DATA] Returns the menu values to their factory settings.
Chapter 10 Menu Operations — Menu list
Select the rotation speed of the fan.
[REC AUTO]: The rotation speed is lowered simultaneously with start of recording. However, the fan will
rotate in appropriate speed for each by [MAIN CODEC] when it reaches the specified temperature. The fan
will rotate at the maximum speed when not recording.
[MATCH CODEC]: The fan will operate in rotation speed appropriate for each in accordance with [MAIN
CODEC].
[ALWAYS FULL]: The fan will always rotate at the maximum speed.
[LIVE]: The fan will always rotate at low speed. However, the fan will operate in appropriate speed for
each by [MAIN CODEC] when it reaches the specified temperature.
f Factory setting: [REC AUTO]
Switches the synchronization signal of the camera signal.
[INT]: Synchronizes to the internal standard signal.
[EXT]: Synchronizes to the entered external standard signal.
f Factory setting: [INT]
Roughly adjusts to match horizontal synchronization phase when building a system.
[−100] - [100]
f Factory setting: [0]
Minutely adjusts to match horizontal synchronization phase when building a system.
[−100] - [100]
f Factory setting: [0]
Adjusts the brightness of the control panel.
[−15] - [15]
f Factory setting: [0]
Adjusts the color levels of the control panel.
[−15] - [15]
f Factory setting: [0]
Adjusts the contrast of the control panel.
[−30] - [30]
f Factory setting: [0]
Sets the brightness of the control panel backlight.
[−1]: Will be darker than [0].
[0]: Standard brightness.
[1]: Will be brighter than [0].
f Factory setting: [0]
Illuminates each button of the control panel and the camera.
[ON], [OFF]
f Factory setting: [ON]
Sets the built-in calendar (year/month/day) and time.
[YEAR]: [2016] - [2037]
[MONTH]: [JAN] - [DEC] ([1] - [12])
[DAY]: [1] - [31] ([28], [29], [30])
[HOUR]: [0] - [23]
[MINUTE]: [0] - [59]
Sets the time zone. After setting the time, when changing the time zone setting, the displayed and
registered times switch to the time with the time difference.
[−12:00] - [+13:00]
(30-minute interval, without [+12:30] and with [+12:45])
Sets the display order of year/month/day.
This is also applied to the recording date displayed in the clip properties.
[Y-M-D]/[M-D-Y]/[D-M-Y]
f Factory setting: [Y-M-D]
[TOTAL OPERATION]: Displays the operation time of the camera.
[IRIS DIAL]: Displays the total number of upward turn or downward turn with the operation of the <IRIS/
SEL> dial button on the camera every 100 operations. ("T" indicates the number.)
Displays the information of the camera.
[MODEL]: Displays the product name.
[SERIAL NO.]: Displays the serial number.
[PRODUCT VERSION]: Displays the version.
Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD
memory card.)
[YES], [NO]
Switches the camera to mode for USB device function.
[YES], [NO]
Reads the camera's execution log from an SD memory card.
[YES], [NO]
Displays the temperature around the sensor of the camera.
Switches the display language of the menu.
[ENGLISH], [CHINESE]
f Factory setting: [ENGLISH]
[YES], [NO]
– 141 –
Description of settings