Panasonic VariCam LT Operating Manual page 122

Item
[AUDIO MONITOR Switches the audio channel to output to the <PHONES> terminal.
CH] Switches the setting of [MENU] → [AUDIO SETTINGS] → [AUDIO OUTPUT] → [MONITOR CH].
Calls the function to adjust the audio input with the <IRIS/SEL> dial button or the <IRIS> dial on the grip module.
[DIRECT VOL CTRL]
The channel set with [MENU] → [AUDIO SETTINGS] → [AUDIO OUTPUT] → [MONITOR CH] will be adjusted.
[VFR SW] Enables/disables the variable frame rate function.
[CHECK LAST CLIP Plays back the first 5 seconds of the newest clip of the clips recorded after the power was turned on.
START] Enabled only in the HOME screen or the VIEW screen.
[CHECK LAST CLIP Plays back the last 5 seconds of the newest clip of the clips recorded after the power was turned on.
END] Enabled only in the HOME screen or the VIEW screen.
The return video signal input to the <GENLOCK IN> terminal can be confirmed in the viewfinder screen, output video from the <VF SDI>
terminal, or the VIEW screen while the button assigned with the function is pressed.
f The return video image is not displayed when a video signal different from the video format of the camera is input. A black screen is
[RETURN]
displayed.
f The viewfinder screen, the output video from the <VF SDI> terminal, or the VIEW screen is momentarily disrupted when the camera
image and the return video image are switched.
@ NOTE
t Only the following functions can be assigned to [USER5] to [USER10].
[INHIBIT], [EXPAND1], [EXPAND2], [IN COLOR F.A.], [SQ. F.A.], [MONO F.A.], [FALSE COLOR], [VF SDI COLOR], [SDI OUT 1 COLOR], [SDI OUT 2
COLOR], [SMOOTH MODE], [VFR SW]
t Only the following functions can be assigned to [USER TOGGLE(USER4)] (<TOGGLE/WB>) switch.
[WB], [SHUTTER], [EI]
Chapter 9 Other Useful Functions — Assigning functions to the USER buttons
Description
– 122 –