Toshiba H7 Operation Manuals page 53

Primary Menu
Special Control Parameters
46
Program Menu Navigation
Sub Menu
Light-load High-speed Operation Load
Detection Time
Light-load High-speed Operation Heavy Load
Detection Time
Switching Load Torque During Forward Run
Heavy Load Torque During Acceleration in
the Forward Direction
Heavy Load Torque During Deceleration in
Crane/Hoist Load
the Forward Direction
Switching Load Torque During Reverse Run
Heavy Load Torque During Acceleration in
the Reverse Direction
Heavy Load Torque During Deceleration in
the Reverse Direction
Frequency for Automatic High-speed
Operation at Light Load
Backlash Setup Not available at the time of this release.
#1 Frequency Setting
#1 Voltage Setting
#2 Frequency Setting
#2 Voltage Setting
#3 Frequency Setting
V/f Five Point Setting
#3 Voltage Setting
#4 Frequency Setting
#4 Voltage Setting
#5 Frequency Setting
#5 Voltage Setting
V/f Adjustment Coefficient
0 Hz Dead Band Frequency Setting Signal
0 Hz Command Stop Function
Over Exciting Cooperation
Stall Cooperation Gain at Field Weakening
Special Parameters Zone
Exciting Starting Rate
Compensation Coefficient for Iron Loss
Voltage Compensation Coefficient for Dead
Time
Dead Time Compensation Enable/Disable
Parameter Name
H7 ASD Operation Manual
Parameter
Number
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
F190
F191
F192
F193
F194
F195
F196
F197
F198
F199
F183
F244
F255
F481
N/A
N/A
F487
N/A
F489