Panasonic AFPE224300 User Manual page 106

FP-e
No.
Number of
temperature input
Tem-
average processing
pera-
409 times
ture
(Available PLC:
inout
model with
thermocouple input)
410 Unit No. setting
Tool Communication
411
port format setting
set-
ting
Communication
414 speed (Baud rate)
setting
Communication
412
mode setting
Communication
413
format setting
Communication
COM.
414
speed (Baud rate)
port
setting
set-
ting
415 Unit no. setting
Selection of modem
416
connection
Starting address for
received buffer of
417
general (serial data)
communication mode
Buffer capacity
setting for data
418 received of general
(serial data)
communication mode
11-8
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Default
Name
value
0
1
Disabled
Data length:
8 bits
9600 bps
Computer link
Data lenght
bit: 8 bits
Parity check:
Odd
Stop bit: 1 bit
9600 bps
1
Disabled
0
1660
Descriptions
0 to 50
For default valeu "0", the number of
average processing times is 20.
1 to 99
Modem connection: enabled/Disabled
Data length: 7 bits/8 bits
When connecting a modem, the format will
be as follows depending on the data length
setting.
8 bits data length: no parity, 1 stop bit
7 bits data length: odd parity, 1 stop bit
9600 bps
19200 bps
Computer link
General-purpose serial communication
MODBUS RTU (Ver.1.2 and higher)
Enter the settings for the various items.
Data lenght: 7 bits/8 bits
-
Parity check: none/with odd/with even
-
Stop bit: 1 bit/2 bits
-
The following setting is valid only when
-
the communication mode specified by
system register 412 has been set to
"General-purpose serial communication".
Terminator CR/CR+LF/None
-
Header: STX not exist/STX exist
-
300 bps / 600 bps / 1200 bps / 2400 bps /
4800 bps / 9600 bps / 19200 bps
1 to 99
(In Ver.1.2 and higher, settings can be
changed in R mode even with the front
operation switch.)
Enabled/Disabled
0 to 1659
0 to 1660