Section Names And Functions - Panasonic AFPE224300 User Manual

2.1 Section Names and Functions

①Display mode switch
Changes the display mode to N, S, R, or I.
When the switch is pressed for 2 seconds or longer, the front switch key is locked. Pressing the switch
once more for 2 seconds or longer unlocks the key.
②Screen changeover switch
Changes the display to 1
When the numerical data is changed, pressing the switch for one second or longer determines the data.
③Front operation switch
Changes the data. This switch is also used as the input switch.
Pressing a switch of the digit for which you would like to change the numerical value during the data
change adds one to the numerical value displayed.
(Data display blinks during the data change.)
④Display screen No.
Indicates the screen number used currently. "1
⑤Display mode
Indicates "N," "S," "R," or "I."
⑥LOCK display
Shows that the switch is locked.
(This display is lit when "LOCK" using the front switch or "ALL LOCK" using the program is selected.)
⑦RUN/PROG. display
Displays the operation mode (RUN or PROG.).
⑧ERR./ALARM display
Indicates when an error or an alarm occurs.
ERR. : Lights up if an error is detected during the self-diagnostic function.
ALARM: Lights up if a hardware error occurs, or if operation slows because of the program,
and the watchdog timer is activated.
2-2
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
st nd
Screen or 2 Screen.
st
" or "2
nd
" is displayed.