Display/Front Operation Switch Specifications - Panasonic AFPE224300 User Manual

2.4 Display/Front Operation Switch Specifications

- Display section specifications
Item
Data display
Mark display
Display mode
Screen No.
Status display
Switch input
Display
Size of the
characters
Note: Numerical values are displayed only in 16-bit. The data can be displayed in a bit, decimal, or
hexadecimal system.
- Front operation switch (External input address)
When the front operation switch is used for external input, use the allocated addresses as shown below.
Example: When "0" is pressed during the S mode, "X30" and "X38" turn ON at the same time.
Reference: A.2 I/O allocation
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
5 digits with a decimal point. (Minus sign can also be used.)
7-segment, color selectable display (Green, red, or orange)
PV SV (Green, red, or orange)
● ºF ºC h m s (Green)
4 modes (Green)
N : Normal mode---Simple characters, data display,
data setting/data input switch
S : Switch mode----Simple characters, data setting/PLC external
input switch
R : Register mode---Internal data, timer/counter value reading
and writing modes
I : I/O monitor mode---I/O status display/PLC external input switch
(Green)
LOCK, RUN and PROG. (Green)
8 points For mode switching
For screen switching
For data setting or external input
*Refer to the input address (below) for external input.
Negative backlight LCD
(Colors in the numerical section can be changed: green, red, or orange
7-segment 6.7 mm
PV SV 1.6 mm
N S R I 1.7 mm
● ºF ºC h m s 1.6 mm
Description
ERR ALARM (Red)
1 point
1 point
6 points
LOCK
ERR
ALARM
Note)
1.4 mm
2-9