Terminal Layout Diagram And Terminal Block Wiring; Terminal Layout Diagram; Terminal Block Wiring - Panasonic AFPE224300 User Manual

3.2 Terminal Layout Diagram and Terminal Block Wiring

3.2.1 Terminal layout diagram

-Terminal layout diagram

3.2.2 Terminal block wiring

Terminal block used and suitable wire
A screw-down terminal block (from Phoenix Contact Co.) or equivalent is used. The suitable wires are
shown below.
-Suitable wires
Size
AWG#24 to 16
For the COM. port and analog input section of the thermocouple input type, the suitable wire size is
AWG#28 to 16 (0.08 mm
-Pole terminal with a compatible insulation sleeve
When a pole terminal is used, use the following models from Phoenix Contact Co.
Manufacturer Cross-sectional area
0.25 mm
0.50 mm
Phoenix
Contact Co.
0.75 mm
1.00 mm
0.5 mm
-Pressure welding tool for pole terminals
Manufacturer
Phoenix Contact Co.
3-6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
-Wiring diagram
Nominal cross-sectional area
0.2 mm
2 2
to 1.25 mm ).
Nominal cross-sectional area
2
AWG#24
2
AWG#20
2
AWG#18
2
AWG#18
2
X 2 AWG#20 X 2
Model No.
Parts No.
CRIMPFOX UD 6
2 2
to 1.25mm
Product No.
12 04 43 6
Parts No.
AI 0.25-6YE
AI 0.5-6WH
AI 0.75-6GY
AI 1-6RD
AI-TWIN2 X 0.5-8WH