Operation In R (Register) Mode; Specifying The Device Type - Panasonic AFPE224300 User Manual

6.2 Operation in R (Register) mode

6.2.1 Specifying the device type

When "PV" blinks, the device type and No. can be changed.
1. Specifying the device type (Example of "EV")
Press the switch "4" until "EV" is displayed as shown above.
Note: At this moment, the "EV0" data is displayed in the lower section.
2. Specifying the device No. (Example of "EV123")
Specify the device No. "EV123" using the switches "0" to "3."
Note: When specifying the No. which is out of the designated range, the display color in the upper
section changes from green to red and the data display in the lower section turns off.
6-3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com