Display Modes And Functions - Panasonic AFPE224300 User Manual

2.2 Display Modes and Functions

2.2.1 Display modes and functions
N mode
Mode
(Normal mode)
Screen
Registered by F180
(SCR) command
Number of
screens
Arbitrary data
Display in
display
the upper
(Characters/Nume
section
rical values)
Arbitrary data
Display in
display
the lower
(Characters/
section
Numerical values)
Operation Used for changing
switch numerical values
Using the F180
(SCR) command, the
elapsed value on the
counter is displayed
in the upper section,
and the set value is
Example
displayed in the
lower section. The
set value can be
changed with the
front operation
switch.
Note 1) Whenever the display mode switch is pressed, the mode displayed changes as follows:
N→S→R→I→N. The display can also be switched from the program using the F180 (DSP)
command.
Note 2) When the display mode switch is pressed for 2 seconds or longer, the front switch is locked.
Pressing the switch once more for 2 seconds or longer unlocks the switch.
Note 3) Screen changeover switch changes the display to 1
Note 4) When the numerical values are changed, pressing the screen changeover switch for one second
or longer determines the data.
Note 5) The operation switches can also be used as input switches in all modes.
Reference: A.2 I/O Allocation
2-4
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
S mode
(Switch mode)
Registered by F180
(SCR) command
2 2
Arbitrary data
display
(Characters/Nume
rical values)
Arbitrary data
display
(Characters/
Numerical values)
Used as the input
switch
Using the F180
(SCR) command, the
message is
displayed in the
upper section, and
the data is displayed
in the lower section.
The display
description can be
changed with the
input switch.
R mode I mode
(Register mode) (I/O monitor mode)
Data monitor of the
internal memory
2
· Input status
Address in the
memory area ·Thermocouple input
Data in the
· Output status
memory area
(Displayed in a
·Thermocouple input
decimal number
system.)
Used for changing Used as the input
numerical values switch
When program When program
operation is checked, operation is checked,
the data description external I/O status is
can be checked by monitored. The front
specifying the operation switch can
arbitrary memory be used as the input
area with the front switch.(However, the
input status of the
operation switch. The
data can also be front operation switch
changed with the cannot be monitored.)
front operation
switch.
st nd
Screen or 2 Screen.
·
External I/O monitor
·
Thermocouple input
monitor
2
monitor
CH.0 monitor
monitor
CH.1 monitor