Mitsubishi Electric IQSS-R-E Reference Manual page 253

■Operations that delete the parameters of a slave station in GX Works3
Parameter information will be deleted from the storage file when performing any of the following operations in GX Works3.
Read the parameters of a slave station by selecting [Parameter Processing of Slave Station]/[The Parameter Processing of
Same Slave Station] from the shortcut menu.
Group
Operation that returns the
parameters of the network
configuration diagram to the default
Operation that deletes a module
Operation that overwrites parameters
Station type Location
Master station/sub- Module parameter
master station
Sub-master station
Master station/sub- System parameter
master station
Module configuration
diagram
"Navigation" window
Master station/sub- Data reading from a
master station programmable controller
"Navigation" window
9.2 Reading/Writing Parameters from/to Devices Supporting iQSS
Operation
Delete and apply a network configuration diagram
manually.
Change the parameter setting method from "Parameter
Editor" to "Program".
Change the station type, and set the parameter for which
the network configuration diagram is default or not existed.
Change the sub-master setting from "Operate with
Parameter of Host Station" to "Read Parameters of the
Master Station".
Import the system parameters. The parameters of a slave
station are not included from the source project.
Change the control CPU from the host CPU to another
CPU.
Remove a module and determine the setting.
Delete a module.
Read data of a module for which the network configuration
is different and the start I/O is the same.
Import the data of a simple motion module and the network
setting.
9 CC-Link IE Field Network
9
251