12.1
Detecting Devices Supporting iQSS Automatically
A device supporting iQSS connected to a MELIPC can be detected and the information can be displayed in the "Ethernet
Configuration" window.
For the creation method of a new project and the operation methods of the "Ethernet Configuration" window, refer to the
following manual.
MI Configurator Operating Manual
Operating procedure
12 Ethernet
318
12.1 Detecting Devices Supporting iQSS Automatically
Create a new project in an engineering tool.
1.
Select "Parameter" "(module type)" and double-click "Basic
Parameter" in the "Navigation" window, then select "External
Device Cooperate Settings" "External Device
Configuration" and double-click "Detail Setting".
The "Ethernet Configuration" window appears.
2.
Click the [Detect Now] button.
The actual system configuration is displayed in the "Ethernet
Configuration" window.
3.
Select [Close with Reflecting the Setting] in the "Ethernet
Configuration" window.
The setting in the "Ethernet Configuration" window is applied to the
network parameter and completed.