Mitsubishi Electric IQSS-R-E Reference Manual page 263

4.
Setting a target device
• Setting a module
When '1H' (module unit) is set for the execution unit, set a start I/O number to SD1364 (iQ Sensor Solution data backup/
restoration target setting (target module)).
In a multiple CPU system, only the CC-Link IE Field Network master station controlled by a host CPU can be backed up. Data
backup cannot be performed for non-controlled modules.
Target device (Module)
0 to FFH: Start I/O number
• Setting a station number
When '2H' (station unit) or '3H' (station sub-ID unit) is set for the execution unit, set a station number to SD1365 (iQ Sensor
Solution data backup/restoration target setting (target device 1)).
Target device (Station number)
1 to 120: Station number
• Setting a station sub-ID number
When '3H' (station sub-ID unit) is set for the execution unit, set a station sub-ID number to SD1366 (iQ Sensor Solution
backup/restoration target setting (target device 2)).
Target device (Station sub-ID
number)
0 to 9999: Station sub-ID number
When backup/restore the data in a device supporting iQSS which is connected to a bridge module
(NZ2AW1GFAL), set the ID number of AnyWireASLINK to SD1366.
5.
Setting the operation setting when a data backup error occurs
Set the operation to be performed when the data backup fails on some devices while being processed to multiple devices
supporting iQSS to the lower 8 bits of SD1367 (iQ Sensor Solution data backup/restoration operation setting).
Operation on error
0H: Continue
1H: Stop
Description
Set the start I/O number (the value obtained by dividing the start I/O number by 16) of the CC-Link IE Field
Network master station which is connected to a target device supporting iQSS.
Description
Set the station number of a target device supporting iQSS or the station number of the module which is
connected to a device supporting iQSS.
Description
Set the station sub-ID number of a target device supporting iQSS.
Description
Set this to continue a data backup even if it fails on some devices.
Set this to stop a data backup if it fails on some devices.
9.4 Backing up/Restoring Data of Devices Supporting iQSS
9 CC-Link IE Field Network
9
261