Select
■Detection method of a system configuration
A system configuration of a device supporting iQSS, which is connected to a bridge module (NZ2AW1C2AL), can also be
detected by either of the following operations.
• Click the [Detect Now] button in the "AnyWireASLINK Configuration" window.
Considerations when detecting devices connected to a bridge module
■Address setting for a device supporting iQSS
To use an iQ Sensor Solution function in a device supporting iQSS which is connected to a bridge module (NZ2AW1C2AL),
set the setting required for communication (such as address setting and amplifier teaching) in advance.
Make sure that the address occupied by a device supporting iQSS is set so as not to exceed the number of transmission
points set for a bridge module (NZ2AW1C2AL).
(CC-Link-AnyWireASLINK Bridge Module User's Manual)
The device supporting iQSS, which is connected to a bridge
module (NZ2AW1C2AL), is displayed in the "AnyWireASLINK
Configuration" window.
5.
Select [AnyWireASLINK Configuration] [Close with
Enabling the Setting] in the "AnyWireASLINK Configuration"
window.
The setting of the "AnyWireASLINK Configuration" window is
enabled and the window is closed.
4.1 Detecting Devices Supporting iQSS Automatically
4
4 CC-Link
61