Verifying Devices Supporting Iqss Against System Configuration - Mitsubishi Electric IQSS-R-E Reference Manual

4.2
Verifying Devices Supporting iQSS Against
System Configuration
The system configuration displayed in the "CC-Link Configuration" window can be verified against the slave stations
connected to a CC-Link master/local module.
The result is displayed in the "Verification Result of the Configuration with the Connected Module" window.
Verify a system configuration when it is manually created or edited.
Operating procedure
2. Check
3. Click
• The display is switched by right-clicking on the "Verification Result of the Configuration with the Connected
Module" window and selecting "Display All"/"Display Mismatch Only"/"Display other than Match".
• The cursor jumps to the corresponding location in the "CC-Link Configuration" window by double-clicking
the row with "Mismatch" in the "Verification Result of the Configuration with the Connected Module" window.
■Verification methods of system configuration information
The system configuration information of CC-Link can also be verified by either of the following operations.
• Click the [Verify] button in the "CC-Link Configuration" window.
• Select [Online]  [Verification of the Configuration with the Connected Module] in MELSOFT Navigator.
For the operation methods of MELSOFT Navigator, refer to the following manual.
(Let's start iQ Works Version 2)
4 CC-Link
62

4.2 Verifying Devices Supporting iQSS Against System Configuration

1. Select
1.
Select [CC-Link Configuration]  [Online]  [Verification of
the Configuration with the Connected Module] in the "CC-Link
Configuration" window.
2.
Read the message and select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox, then click the [Yes] button.
In any of the following cases, select the "Set the Module
Connected to the Communication Module also as the Read
Object" checkbox.
• The verification function of connected devices and
configurations is used for the first time
• The CPU module was reset or turned OFF.
• The actual system configuration was changed.
The verification results are displayed in the "Verification Result of
the Configuration with the Connected Module" window.