Reading/Writing Parameters From/To Devices Supporting Iqss - Mitsubishi Electric IQSS-R-E Reference Manual

3.3
Reading/Writing Parameters from/to Devices
Supporting iQSS
Parameters can be read from and written to a slave module.
For the operation methods of the "AnyWireASLINK Configuration" window, refer to the following manual.
 GX Works2 Version 1 Operating Manual (Intelligent Function Module)
Window
1. Select
• The data backup/restoration function is useful to read/write the parameters of multiple devices supporting
iQSS in a batch. (Page 33 Backing up/Restoring Data of Devices Supporting iQSS)
• The useful function (linkage with dedicated tools) can also be used in the "AnyWireASLINK Configuration"
window. (Page 323 Linkage with dedicated tools (association with properties))
■Display methods of the "Parameter Processing of Slave Module" screen
The "Parameter Processing of Slave Module" screen can also be displayed by any of the following operations.
• Select a target module in 'List of modules' or 'Device map area' in the "AnyWireASLINK Configuration" window, then right-
click and select [Online]  [Parameter Processing of Slave Module] from the shortcut menu.
• Select a target module in the 'List of modules' or 'Device map area' on the "Sensor/Device Monitor for AnyWireASLINK"
screen, and select [Online]  [Parameter Processing of Slave Module].
• Select a target module in the 'List of modules' or 'Device map area' on the "Sensor/Device Monitor for AnyWireASLINK"
screen, then right-click and select [Parameter Processing of Slave Module] from the shortcut menu.
For details on the "Sensor/Device Monitor for AnyWireASLINK" screen, refer to the following section.
Page 32 Monitoring Devices Supporting iQSS
3 AnyWireASLINK
30

3.3 Reading/Writing Parameters from/to Devices Supporting iQSS

2. Select
1.
Select a target device supporting iQSS in 'List of modules' or
'Device map area' in the "AnyWireASLINK Configuration"
window, and select [AnyWireASLINK Configuration] 
[Online]  [Parameter Processing of Slave Module].
2.
Read/write the parameters on the "Parameter Processing of
Slave Module" screen.