Siemens Acuson S1000 Instructions For Use Manual page 139

To
Copy a thumbnail to a film
sheet
Copy a thumbnail to a
patient report
Delete a thumbnail
Play back a thumbnail clip
I n s t r u c t i o n s f o r U s e
Do This
Note: You can select multiple consecutive or non-consecutive
thumbnails.
1. Select a thumbnail from the thumbnail panel.
2. Click Copy to Film Sheet on the image screen.
3. During review, select the control assigned to the copy
function.
● Select Copy To Film.
○ For systems without a touch screen, press the Copy to
Film soft key.
1. Display a patient report.
● Press REPORT.
○ For systems without a touch screen, press Report on
the keyboard.
2. Click Images to access the image section of the report.
3. Select the required thumbnail from the thumbnail panel
displayed at the bottom of the report.
4. Roll the trackball to position the image in the report and
then press SELECT.
Note: Images marked for deletion in imaging or review are
not removed from the patient report.
Note: You can select multiple consecutive or non-consecutive
thumbnails.
1. Select a thumbnail from the thumbnail panel.
2. Click Delete on the image screen.
The system places a deletion icon on each marked
thumbnail.
Note: If the selected thumbnail displays a stress echo icon,
all stress echo images are marked for deletion. The system
displays a dialog box to confirm deletion of the stress echo
images.
3. To keep a thumbnail currently marked for deletion, select
the thumbnail and then press Delete again.
Thumbnails marked for deletion remain in the thumbnail
panel until you end the current exam or enter new patient
information.
 Press SELECT twice in quick succession (double-click).
The system displays the clip in the review screen in
full-screen format.
4 E xa m i n a t i o n F u n d a m e n t a l s
Control Tool Tip
Copy to
Film
Sheet
--- ---
Delete
--- ---
4 - 2 7