Sterilizing Transducers - 14L5 Sp - Siemens Acuson S1000 Instructions For Use Manual

2 S a f e t y a n d C a r e
Sterilizing Transducers — 14L5 SP
Caution: The transducers have been designed and tested to be able to withstand sterilization as
recommended by the manufacturer of the sterilization system. Carefully follow the sterilization
manufacturer's instructions.
®
The STERRAD sterilization system, a hydrogen peroxide gas plasma sterilization system, is
approved for use with the listed intraoperative transducer(s).
14L5 SP

To sterilize a transducer with the STERRAD system:
Note: This procedure applies to the 14L5 SP transducer only.
1. Disconnect the transducer from the system.
2. Thoroughly clean, rinse, and dry the transducer.
3. Carefully follow the manufacturer's instructions for sterilization.
2 - 4 6 I n s t r u c t i o n s f o r U s e