Siemens Acuson S1000 Instructions For Use Manual page 219

To
Apply predefined optimization
settings to the displayed
reference data
Adjust the range of values
displayed in the reference data
Adjust the midpoint of values
displayed in the reference data
Adjust the opacity of the
displayed reference data
I n s t r u c t i o n s f o r U s e
Do this
(Available only during planning)
Note: If the volume quadrant is selected, the system applies the setting to the
volume data. If an MPR quadrant is selected, the system applies the setting to all
MPRs.
 Select the optimization setting.
● Rotate [Preset].
○ For systems without a touch screen, select a Presets setting on the image
menu.
Note: CTA is a computed tomography angiogram. T1 and T2 are types of
magnetic resonance imaging (MRI) scans.
(Available only during planning)
Note: If the volume quadrant is selected, the system applies the setting to the
volume data. If an MPR quadrant is selected, the system applies the setting to all
MPRs.
 Select the value range setting.
● Drag the Window and Level icon on the touch screen to adjust the setting.
○ For systems without a touch screen, select a Window setting on the image
menu.
(Available only during planning)
Note: If the volume quadrant is selected, the system applies the setting to the
volume data. If an MPR quadrant is selected, the system applies the setting to all
MPRs.
 Select the value setting.
● Drag the Window and Level icon on the touch screen to adjust the setting.
○ For systems without a touch screen, select a Level setting on the image
menu.
(Available only when a blended image is displayed)
 Select an opacity setting.
● Rotate [Transparency].
○ For systems without a touch screen, select a Transparency setting on the
image menu.
The following transparency settings are available when a blended image is
displayed.
0% - The reference data is not visible.
Less than 50% - More of the ultrasound image and less of the reference data is
visible.
50% - Both the ultrasound image and the reference data are equally visible.
More than 50% - More of the reference data and less of ultrasound image is
visible.
100% - The reference data is fully visible and the ultrasound image is less
visible.
9 e S i e F u s i o n I m a g i n g
9 - 1 3