Using The Rear Brakes - Siemens Acuson S1000 Instructions For Use Manual

3 S y s t e m S e t u p
Task
To set the front brakes:
To release the front brakes:
To set the swivel brakes:
To release the swivel brakes:

Using the Rear Brakes

The rear brakes are set individually as either unlocked or locked.
Rear Brakes.
Task
To set the rear brakes:
To release the rear brakes:
3 - 4
Procedure
 Press the center section of the front bumper down firmly with your foot until
the brakes lock into place. This is the lowest position for the front bumper.
 Lift the center section of the front bumper from underneath until it clicks once,
using the top of your foot. This is the center position for the front bumper.
 Lift the center section of the front bumper from underneath firmly until the
wheels are locked in a forward position, using the top of your foot. This is the
highest position for the front bumper.
 Press the center section of the front bumper down with your foot until it clicks
once. This is the center position for the front bumper.
Procedure
 Using your foot, move lever to the Lock position until you hear a click.
 Using your foot, move lever to the Unlock position until you hear a click.
I n s t r u c t i o n s f o r U s e