Figure 3-73 Optional 6800 Enclosure with Battery Pack
3.34.1 Instructions
1) Insert the battery(s) into the battery compartment with the terminals facing
2) For the 12/24 VDC solar power system or the 24 VDC UPS power system, a dual
battery cable is provided with the unit (see
battery connections using
Page 3–70
Figure 3-74 12/24 VDC Dual Battery Pack Cable
up (see
Figure
3-73).
•
Connect the battery 1 red wire lug to battery 1 positive terminal.
•
Connect the battery 1 black wire lug to battery 1 negative terminal.
•
Connect the battery 2 red wire lug to battery 2 positive terminal.
•
Connect the battery 2 black wire lug to battery 2 negative terminal.
BATTERY 2
BATTERY 1
Figure
Figure 3-75
for 12 or 24 VDC.
3-74). Make the following
2101510 Rev. AG