Installation; Overview; What This Means; Organization - ABB NGC8206 User Manual

3.0

INSTALLATION

3.1 Overview

This chapter provides information for field installation of the NGC and optional
equipment. After completing the procedures within this chapter, the NGC is ready
for start-up.
The following procedures, unless otherwise stated, are applicable to all NGC
units. The NGC is designed to be pipe-mounted (see
shelf mounting kit (see
wall inside or outside of a building, or a mounting plate for use in the optional
environmental enclosure.
3.1.1

What this Means

3.1.2

Organization

The following instruction sections are organized in the suggested installation
order. Not all installation instructions will apply to the situation. For example, some
procedures may vary when the installation does not require certain equipment.
2101510 Rev. AG
Figure 3-2) may be purchased for mounting the unit on a
The installation instructions in this chapter are to be performed
only when the area is known to be non-hazardous.
Read this chapter to establish an installation plan. Also, before
beginning, refer to the wiring diagrams delivered with the new
NGC.
Installation instructions that feature this icon are applicable
only when the installation involves an environmental
enclosure (ENC82). All other instructions may or may not be
applicable.
Please note that where applicable, typical instructions are first
and variations or specialized instructions follow.
Figure 3-1). Optionally, a
Page 3–1