6) Insert gas probe into pipeline coupling (see
7) Using the correct tool, tighten probe. Securely tighten so there is no gas leakage.
Do not over-tighten.
8) Install shut-off valve on secondary side of sample probe, if desired.
1/4" OUTLET PORT
THREADED NECK 3/4" NPT.
PRESSURE GAUGE
OUTLET PORT 1/4" NPT
3/4" NPT
3.4 Stand Alone Installation
If installing a NGC8201 using a free-standing pipe, use this procedure to install the
pipe. Before beginning, review the procedure and the materials required for
installation.
Page 3–6
Figure 3-3 Sample Probe
GAS FLOW
Figure 3-4 Sample Probe Insertion
Figure
3-4).
PRESSURE RELIEF VALVE
PRESSURE GUAGE
RELIEF VALVE
CUSTOMER INSTALLED COUPLING
SAMPLE PROBE
2101510 Rev. AG