Figure 3-5 Enc82L-Enclosure Stand Installation - ABB NGC8206 User Manual

57.00"
84.00"
4.00"
3) Place a split washer, then a flat washer on one of the 1 ¼" bolts and insert
through bolt hole located in the angle iron into the outermost corner of the
enclosure (see
4) Move the channel nut into position so that bolt will screw into the nut. Screw bolt
into nut. Do not tighten.
Page 3–8
21.50"
24.00"
Figure 3-5 ENC82L–Enclosure Stand Installation
Figure 3-6).
27.00"
34.00"
38.00"
2101510 Rev. AG
55.50"