Installing The Air Shroud - Dell E43S Series Installation And Service Manual

Figure 13. Removing the air shroud
Next step
Install the air shroud.

Installing the air shroud

Prerequisite
1 Follow the safety guidelines listed in
Steps
1 Insert the air shroud into the sled, aligning the shroud hinge with slot on the sled chassis.
NOTE: Ensure that both the SATA cables are routed through the air shroud cable guide slot behind the air shroud latches.
NOTE: Ensure that neither of the cables are pinched or pressed under the air shroud.
2 Press the air shroud until the locks click into place.
Safety instructions.
Installing and removing system components 55