Unable to boot to M.2 drive installed in slot 1
Issue:
When two unconfigured bootable M.2 drives are inserted into the BOSS device, only the slot 0 drive boots.
Probable cause:
Working as designed, BIOS only allows booting from the first listed boot device (in this case, slot 0) per peripheral
controller. This only occurs in legacy BIOS boot mode.
Corrective action:
Swap the drive in slot 1 to slot 0.
CLI reports unsupported features
Issue:
Several commands, options, or other features listed by the Marvell CLI state that they are unsupported when run.
Probable cause:
CLI shows the same information on all Marvell products, but only implements the functions which are pertinent to
that platform or system.
Corrective action:
Use supported features.
BOSS card
99