Support bracket
Removing the support bracket
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the sled
from the enclosure.
Step
Using the Phillips #1 screwdriver, remove the screws that secure the support bracket and lift the bracket away from the sled.
Figure 18. Removing the support bracket
Next step
Install the support
bracket.
Installing the support bracket
Prerequisite
1
Follow the safety guidelines listed in
Steps
1
Place the support bracket in the sled.
2
Using a Phillips #1 screwdriver, replace the screws to secure the bracket in place.
60
Installing and removing system components
Safety
instructions.
Before working inside your
Safety
instructions.
system.