Dell E43S Series Installation And Service Manual page 76

3 Insert the card edge connector and push the card firmly until the card is fully seated on the bridge board.
4 Using the Phillips #2 screwdriver, secure the mezzanine card and bracket assembly to the sled using screws.
Figure 33. Installing a mezzanine card
Next steps
1 Install the mezzanine card
2 Install the expansion card riser
3 Install the sled into the enclosure.
4 Follow the procedure listed in
76 Installing and removing system components
or the mezzanine card filler bracket.
assembly.
After working inside your system.