Figure 25. Installing an expansion card
Next steps
1
Install the expansion card riser
2
Install the sled
into the enclosure.
3
Follow the procedure listed in
Removing the riser card
Prerequisites
1
Follow the safety guidelines listed in
2
Follow the procedure listed in
3
Remove the sled
from the enclosure.
4
Remove the expansion card riser
5
If installed,
remove the expansion
Steps
1
Using the Phillips #2 screwdriver, remove the screws that secure the riser card to the expansion card bracket.
2
Lift the riser card away from the expansion card bracket.
68
Installing and removing system components
assembly.
After working inside your
system.
Safety
instructions.
Before working inside your
assembly.
card.
system.