Removing An Expansion Card - Dell E43S Series Installation And Service Manual

Figure 21. Installing the expansion card riser assembly
Next steps
1 Install the sled into the enclosure.
2 Follow the procedure listed in

Removing an expansion card

Prerequisites
1 Follow the safety guidelines listed in
2 Follow the procedure listed in
3 Remove the sled from the enclosure.
4 Remove the expansion card riser
Steps
1 Remove the screw that secures the expansion card to the assembly.
2 Hold the expansion card by its edges, and carefully remove it from the riser card.
NOTE: You must install an expansion card filler bracket over an empty expansion slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in proper
cooling and airflow inside the system.
64 Installing and removing system components
After working inside your system.
Safety instructions.
Before working inside your
assembly.
system.