Siemens SINUMERIK 840C Installation Instructions Manual page 562

04.96
1638
Default value
0
This machine data is relevant only for Siemens-internal purposes and must
1639
Default value
0.0
Input of the emergency retraction speed, which is given as setpoint speed during the
emergency retraction time (MD 1638) in the case of a failure.
This machine data is relevant only for Siemens-internal purposes and must
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
Emergency retraction time
Lower input limit Upper input limit
0
not be altered.
Emergency retraction speed
Lower input limit Upper input limit
-4194304 4194304
not be altered.
6FC5197- AA50
7 Drive Machine Data (SIMODRIVE Drive MD)
7.3.2 Drive MD (data description)
Units
10000 ms
Units
rev/min
Active
at once
Active
at once
7–147