Siemens SINUMERIK 840C Installation Instructions Manual page 451

7 Drive Machine Data (SIMODRIVE Drive MD)
7.1.2 MSD MD (data description - SW 3)
242
Default value
3
A function can be assigned to programmable message 2 in this machine data.
The default setting corresponds to M
243
Default value
1
A function can be assigned to programmable message 3 in this machine data.
The default setting corresponds to n
244
Default value
4
A function can be assigned to programmable message 4 in this machine data.
The default setting corresponds to n
245
Default value
20
A function can be assigned to programmable message 5 in this machine data.
The default setting corresponds to variable relay function 1 (MD 185, see MD 241 for other
settings).
246
Default value
7
A function can be assigned to programmable message 6 in this machine data.
The default setting corresponds to variable relay function 2 (MD 190, see MD 241 for other
settings).
7–36
Programmable message 2
Lower input limit Upper input limit
1
> M (see MD 241 for other settings).
d dx
Programmable message 3
Lower input limit Upper input limit
1
< n (see MD 241 for other settings).
act min
Programmable message 4
Lower input limit Upper input limit
1
< n (see MD 241 for other settings).
act x
Programmable message 5
Lower input limit Upper input limit
1
Programmable message 6
Lower input limit Upper input limit
1
©
Siemens AG 1992 All Rights Reserved
Units
20 –
Units
20 –
Units
20 –
Units
20 –
Units
20 –
6FC5197- AA50
SINUMERIK 840C (IA)
10.94
Active
at once
Active
at once
Active
at once
Active
at once
Active
at once