Siemens SINUMERIK 840C Installation Instructions Manual page 207

6 NC Machine Data (NC MD), NC Setting Data (NC SD)
6.2 General machine data (general data)
250
Default value
0
SINUMERIK 840C can display two languages at option.
The following entries are possible:
0 = Language 1
1 = Language 2
The following language combinations are available:
Language 1 Language 2
German English
German French
German Italian
German Spanish
English French
English Italian
English Spanish
You can check which combination has been ordered and implemented via the "Control info"
softkey.
260
Default value
- 1
261
Default value
- 1
Active: when all channels of the mode group are in STOP status.
C axis operation is selected and deselected via M functions. The numbers of these M
functions can be allocated on a customer-specific basis.
_______
1) Up to SW 1
6–22
Language switchover
Lower input limit Upper input limit
0
M function "C axis on"
Lower input limit Upper input limit
- 1
M function "C axis off"
Lower input limit Upper input limit
- 1
©
Siemens AG 1992 All Rights Reserved
1)
Units
1 –
Units
9 999 - 1
Units
9 999 -
6FC5197- AA50
SINUMERIK 840C (IA)
09.95
Active on
Power On
Active on
NC Stop
Active on
NC Stop