Value Ranges And Default Values - Siemens SINUMERIK 840C Installation Instructions Manual

09.01 09.95

4.4.2.2 Value ranges and default values

LANGUAGE
BT_NAME
PROTLEN1
PROTLEN2
FLUSHLEN1
FLUSHLEN2
FLUSHTIME
PROTMASK
PROTMASK2
PRIO_PO
PRIO_RE
PRIO_CA
PRIO_PA
PRIO_PM
PRIO_KO
SYSFONT
TFORMAT
Language This defines the language.
The possible languages are:
S
S
S
S
S
The default setting is DEUTSCH (upper case mandatory).
For certain software versions, SWEDISH, RUSSIAN and HUNGARIAN are
available.
SYSFONT With SW 4.4 and higher, the character set is defined by an entry in the
<character set number> configuration file of the master control.
Possible character set numbers:
0
1
2
3
With SW 5.* and higher, the SYSFONT is stored in the system when selecting
the language.
1) Up to SW 2 only
2) SW 4.4 and higher
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SINUMERIK 840C (IA)
Keyword
String of max. 8 characters
String of max. 8 characters
1 – 32767 (with PROTMODEDISK) 25
1 – 32767 (1–200 without
0 .. 10
0 .. 10
0.1 – 32767
1 )
Special format
Special format
1 )
1 )
1 )
1 )
1 )
1 )
2)
0, 1, 2
String of max. 20 characters, see
above
DEUTSCH
ENGLISH
ITALIANO
FRANÇAIS
ESPAÑOL
Standard character set
Cyrillic character set
Character set for Slavonic languages (and Hungarian)
Portuguese
4.4.2 Configuration file CONFIG
Value range
PROTMODEDISK)
0,1 – < 32000
4 MMC Area Diagnosis
Default value
"DEUTSCH"
"SER:"
25
0
2
0
K = OT < 4
K > 0
T < 2
10
110
210
310
350
510
0
"hh:mm:ss DD.MM.YY"
4–27