Machine And Setting Data - Siemens SINUMERIK 804D sl Commissioning Manual

Fundamentals

15.6 Machine and setting data

15.6 Machine and setting data
Introduction
Adaption of the control at the machine is carried out using the machine and setting data.
Parameter assignment
• Machine data
• Setting data
• Option data
Overview of machine and setting data
The table below lists the areas for machine and setting data. The List Manual contains a
detailed description.
Table 15-5
Range
from 2 to 9977
from 9000 to 9999
from 10000 to 18999
from 19000 to 19999
from 20000 to 28999
from 29000 to 29999
from 30000 to 38999
from 39000 to 39999
from 41000 to 41999
from 42000 to 42999
278
The machine data (MD) are divided into the following areas:
– General machine data
– Channel-specific machine data
– Axis-specific machine data
– Machine data for control unit
– Machine data for infeed
– Machine data for drives
The setting data (SD) are divided into the following areas:
– General setting data
– Channel-specific setting data
– Axis-specific setting data
For enabling options. The option data are included in the scope of delivery.
Overview of machine and setting data
Name
Machine data for drives
Operator panel machine data
General machine data
Reserved
Channelspecific machine data
Reserved
Axisspecific machine data
Reserved
General setting data
Channelspecific setting data
Commissioning Manual, 11/2006, 6FC5397-2AP10-2BA0
CNC Part 1 (NCK, PLC, drive)