Technical Data - ABB ACH580 Series User Manual

ACH580 E-Clipse bypass and packaged drive user manual
Branch circuit protection
Input power is connected to the ACH580 with E-Clipse Bypass through a door
interlocked disconnect switch or circuit breaker. Neither of these inputs are fused.
The branch circuit that provides power to the ACH580 with E-Clipse Bypass with
disconnect switch must include the specified external fuses to provide short circuit
and ground fault protection for the motor in the bypass mode.
When connected to a 240V or 480V power source, the ACH580 with E-Clipse
Bypass with the circuit breaker option is suitable for use on a circuit capable of
delivering not more than 100,000 RMS symmetrical amperes. When connected
to a 600V power source ABB E-Clipse units provided with a circuit breaker,
VCR and BCR configurations, are suitable for use on a circuit capable of
delivering not more than 10,000 RMS symmetrical amperes.
Fuses
Note: The UL listed drive fuses in the table are provided in the purchased product.
• Replacement fuses are required to be of the same class, current rating, and
voltage rating. Fuses from other manufacturers can be used if they are 600V
rated and meet the specifications given in the table.
• Fuses with higher current rating than specified must not be used.
208/230 Volt fuses for vertical enclosures
Type Code
ACH580-VxR-04A6-2
ACH580-VxR-06A6-2
ACH580-VxR-07A5-2
ACH580-VxR-10A6-2
ACH580-VxR-017A-2
ACH580-VxR-024A-2
ACH580-VxR-031A-2
ACH580-VxR-046A-2
ACH580-VxR-059A-2
ACH580-VxR-075A-2
1) "VxR" represents both VCR and VDR.
Nominal Output Ratings
1
Drive Package
Current Power
A HP
4.6 1
6.6 1.5
7.5 2
10.6 3
16.7 5
24.2 7.5
30.8 10
46.2 15
59.4 20
74.8 25
Internal Drive
Fuse Rating
Base
Drive
Frame
Class
Size
208/230 Volts
R1 Class CC
R1 Class CC
R1 Class CC
R1 Class CC
R1 Class CC
R2 Class CC
R2 Class T
R3 Class T
R3 Class T
R4 Class T
205
External Fuse for
Disconnect Option
Max Max
Current Class Current
Rating Rating
15A Class J 15A
15A Class J 15A
15A Class J 20A
15A Class J 25A
30A Class J 40A
30A Class J 45A
40A Class J 60A
80A Class J 100A
80A Class J 100A
100A Class J 100A

Technical data