226
Preparing for installation
Drive identification
Drive label
To identify the type of device you are installing, refer to the type code number on the
device identification label.
• Wall mounting base drives – label attached on the side surface of the enclosure.
• Packaged drive with screw cover – label on side surface of the enclosure.
• Enclosure with hinged cover/door – label on inside surface of the cover/door.
• 3R enclosure with hinged cover/door – label attached to outside surface on the
left side of enclosure.
Type code
Use the following to interpret the type code found on the identification label.
AC, HVAC Drive = 580 Product Series
Construction
01 = Base Drive
BCR = E-Clipse Bypass with circuit breaker
BDR = E-Clipse Bypass with disconnect switch
PCR = Packaged Drive with circuit breaker
PDR = Packaged Drive with disconnect switch
VCR = Vertical bypass with circuit breaker
VDR = Vertical bypass with disconnect switch
VFD output current rating (See ratings chart for details)
Voltage rating
2 = 208...240 VAC
4 = 440...480 VAC
6 = 575...600 VAC
Enclosure protection class
No specification = UL (NEMA) Type 1
+B056 = UL (NEMA) Type 12
+B058 = UL (NEMA) Type 3R
Power options
+E213 = Line reactor (PxR or BxR Configurations)
+F267 = Service switch (VxR or BxR Configurations)
Input/Output option modules
+L501 = Ext 24V DC/AC and digital I/O Extension
+L512 = 115/230 V digital input interface
+L523 = Ext 24V and isolated PTC Interface
Fieldbus adaptors
+K451 = DeviceNet Adapter
+K452 = LonWorks Adapter
+K454 = Profibus Adapter
+K462 = ControlNet Adapter
+K465 = BACnet/IP (2-port) Adapter (PxR or -01 configurations)
+K475 = Ethernet Adapter
Keypad
+J429 = Control panel with Bluetooth® interface
Installation
ACH580 E-Clipse bypass and packaged drive user manual
ACH580-PCR-012A-4 +...+...