Functions Of Utility Package; Function List Of Utility Package - Mitsubishi Electric MELSEC Q Series User Manual

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.4

Functions of Utility Package

7.4.1
The following table lists the functions of Utility Package.
Function
PING test
Importing/exporting setting data
Own Nic setting
Producer Tag setting
Consumer Tag setting
Message Tag setting
User Define setting
Refresh parameter setting
Monitoring function
7
- 17 7.4 Functions of Utility Package

7.4.1 Function list of Utility Package

Function list of Utility Package
Table 7.3 Utility Package function list
Performs a PING test.
Exports label data that have been configured with Utility Package to a GX
Works2 project.
Exports Tag Parameters that have been configured with Utility Package to a
CSV file.
Registers EtherNet/IP module information that is configured with Utility Package.
When multiple EtherNet/IP modules are connected to one CPU module, settings
can be performed simultaneously for four modules per project.
•Start I/O No.
•IP Address, Subnet Mask, Default Gateway
•Common Parameter (The number of connection tags and the size of the
storage area for transmitted and received data)
Makes settings for Producer Tag and the auto refresh target device of the Class1
Tag communications.
Make settings for Consumer Tag and the auto refresh target device of the Class1
Tag communications.
Makes settings for Class3/UCMM Tag and the auto refresh target device.
Arbitrarily defines Data Types other than INT and DINT and registers them.
Set the refresh target device for the following items.
•Send/receive data of Tag communication
•Error codes of own station
•Communication status of Tag communication
•Error code for each tag
Error code and communication status can be checked for each tag.
Network diagnostics can be executed.
Description Reference section
Section 5.8
Section 7.8.1
Section 7.8.2
Section 7.9.1 (1)
Section 7.9.2
Section 7.9.3
Section 7.9.4
Section 7.9.5
Section 7.9.7
Section 7.6
Section 7.11