Parameter Setting - Mitsubishi Electric MELSEC Q Series User Manual

8
PROGRAMMING
8.3

Parameter Setting

Set parameters in Utility Package referring to Section 8.1 and Section 8.2 and write them
to the module.
(1) System 1 (192.168.0.1) setting
8
- 3 8.3 Parameter Setting
(a) IP address and Common Parameter setting
Double-click a cell in "Own Nic" in the "Basic" window on the "Setting" tab and
make settings in the "Add Own Nic" window as shown below.
Figure 8.4 Setting in the "Add Own Nic" window for System 1
(b) Connected device setting
Make settings in "[Remote Nic]" in the "Basic" window as shown below.
Figure 8.5 Setting in the "Basic" window for System 1