Mitsubishi Electric MELSEC Q Series User Manual page 239

APPENDICES
(2) Switch setting for the intelligent function module
Double-click "PLC parameter" in the project window and click the "I/O assignment"
tab.
Clicking
Switch setting
module" window.
Refer to the following and complete the setting.
Figure APPX.5 "Switch setting for I/O and intelligent function module"
Table APPX.4 Setting items in "Switch setting for I/O and intelligent function module"
Item
Switch 1
Switch 2
Switch 3
Switch 4
Switch 5
Figure APPX.4 "I/O assignment"
displays the "Switch setting for I/O and intelligent function
Set the hardware test or self-loopback test.
No settings (blank): Online mode (default)
000D : Hardware test
H
000E : Self-loopback test
H
No settings (blank)
When any item is set, delete the settings and leave the field blank.
Appendix 3 When Using GX Developer
Appendix 3.1 Operation of GX Developer
Select "HEX".
Description
9
APPX
- 5