Message" Window - Mitsubishi Electric MELSEC Q Series User Manual

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.9.4

"Message" window

Make settings for the Class3/UCMM Tag and the auto refresh target Tag.
(1) Display and settings of the "Message" window
Item
The settings of the Class3/UCMM Tag communications are displayed.
The connected Tag count and the size of the storage area for transmitted and received data are displayed as
"Tag Counts" and "Input/Output Area Size" set in the "Add Own Nic" window of the "Basic" window.
Tag setting status list
(
Any row of a Nic No. that has not been set is displayed grey.
Tag Counts "Number of registered Tags/number of connected Tags" is displayed.
"Number of words used/size of the storage area for transmitted and received data" of Data Area is displayed.
The number of words used is applied as shown below when "Setting Type" of the "Message Tag" window is
selected and "Data Size" is configured. (
Data Area
section)
•When "Originator Read" or "Target Write" is selected for setting: Applied to "Input Area".
•When "Originator Write" or "Target Read" is selected for setting: Applied to "Output Area".
"Number of words used/size of the storage area for transmitted and received data" of Extension Data Area is
Extension Data Area displayed.
Extension Data Area is used when the number of words used exceeds the size of "Data Area".
Figure 7.26 "Message" window
Table 7.20 "Message" window items
Section 7.9.1 (1) Display and settings of the "Add Own Nic" window)
Description
(2) Display and settings of the "Message Tag" window in this
7.9 "Setting" Tab (Parameter Settings)
7.9.4 "Message" window
1
2
Tag setting status list
Tag Parameter list
3
4
5
6
7
8
7
- 44